Mineralization time and tectonic setting of the Zhengguang Au deposit in the Duobaoshan ore field,Heilongjiang Province,NE China

The Zhengguang deposit, a representative large gold deposit in the Duobaoshan ore field in NE China, is located in the northeast of the Central Asian Orogenic Belt (CAOB). Ore body emplacement was structurally controlled and occurs mainly at the contact zone between the strata of Duobaoshan Formation and an Ordovician diorite stock. The diorite rocks have a close genetic relationship with Au mineralization. Re–Os isotope dating of Au-bearing pyrite yields an isochron age of 506 ± 44 Ma (MSWD = 15). Based on present and previous dating results, it can be concluded that the Zhengguang deposit formed at ~480 Ma. The mineralization time of the Zhengguang deposit is nearly identical to those of the Duobaoshan and Tongshan deposits, indicating they are all derived from the same metallogenic system. The Duobaoshan-style porphyry Cu–Mo mineralization may exist at deeper levels at Zhengguang. The geochemical characteristics of the Zhengguang dioritic rocks presented in this paper are similar to those of bajaitic high-Mg andesite, and the magmas originated from a mantle wedge metasomatized by melts from a subducting oceanic slab at an active continental margin setting. The Ordovician magmatic–metallogenic events in the Duobaoshan ore field were caused by the westward subduction of an oceanic slab located between the Xing’an and Songliao blocks. It is worth pointing out that the Zhengguang deposit is the oldest known Phanerozoic Au deposit in NE China. Further studies of this deposit will improve understanding of the regularity of ore formation and aid mineralization forecast across the Duobaoshan region.     

基于波形重定技术的杭州湾平均海面高模型建立

利用AVISO提供的SARAL卫星杭州湾周年的WAVEFORM数据,通过对卫星波形分析,提出了一种新的波形重定方法,该方法在顾及波形物理机制基础上,根据各波形的特征进行重定。对重定前后的波形数据进行粗差剔除、共线平均,分析了重定后数据质量。通过交叉点平差,结合验潮站数据建立杭州湾平均海面高模型,所建模型与验潮站平均海面高差值的平均值为0.006m,标准差为0.038m。结果表明,利用本文提出的方法能显著提高卫星测高数据的精度与质量。     

基于功能点的海洋测绘软件成本估算的研究

软件规模在项目的计划与实施中具有指导性的作用。比较了多种软件规模估算方法的优缺点,给出了功能点法估算软件规模的方法和步骤。首先计算软件未调整功能点数,再根据复杂性因子调整功能点数,最后根据企业工资效率估算出软件的成本。并结合海洋测绘软件的实例,列举了该方法的实施过程。     

不同刚度植物杆群对规则波传播及紊动特性影响研究

以不同刚度硅胶圆杆群为概化植物模型,测定其抗弯弹性模量,通过波浪水槽实验,研究规则波在不同刚度植物杆群内的流速分布、紊动特征及不同刚度杆群的消浪效果。实验结果表明,当波浪通过柔性杆群时,受其摆动的影响,流速周期变化从单峰型逐渐转变成双峰型,杆群刚度越小形成的二次波峰越明显;不同刚度杆群内水体紊动强度变化显示,杆群刚度越大,造成杆群内水体的紊动强度越大;随着杆群抗弯弹性模量的增大,其消浪系数也增大,消浪系数的增长与材料的抗弯弹性模量值非线性关系,而是在某一弹性模量范围内,对消浪系数的影响较为敏感。     

Ultimate Bending Capacity of Strain Hardening Steel Pipes

Based on Hencky’s total strain theory of plasticity, ultimate bending capacity of steel pipes can be determined analytically assuming an elastic-linear strain hardening material, the simplified analytical solution is proposed as well. Good agreement is observed when ultimate bending capacities obtained from analytical solutions are compared with experimental results from full-size tests of steel pipes. Parametric study conducted as part of this paper indicates that the strain hardening effect has significant influence on the ultimate bending capacity of steel pipes. It is shown that pipe considering strain hardening yields higher bending capacity than that of pipe assumed as elastic-perfectly plastic material. Thus, the ignorance of strain hardening effect, as commonly assumed in current codes, may underestimate the ultimate bending capacity of steel pipes. The solutions proposed in this paper are applicable in the design of offshore/onshore steel pipes, supports of offshore platforms and other tubular structural steel members.     

Failure Pressure Analysis of Corroded Moderate-to-High Strength Pipelines

Based on the elastic-plastic, large-deformation finite element method, burst capacity of steel pipeline with longitudinal corrosion defect subjected to internal pressure is studied. The appropriate stress-based criterion is used to predict the failure pressure of finite element model of corroded pipeline under internal pressure. By considering the pipe steel grades and geometries of corrosion defects, a series of finite element analyses is conducted. The effects of corrosion depth, length and width on burst capacity are also discussed. A specific failure pressure solution for the assessment of corrosion defects in moderate-to-high strength pipeline is proposed on the base of numerical results. The failure pressures predicted by the proposed method are in better agreement with the experimental results than the results by the other methods.     

腐蚀管道在内压和轴向压力影响下的弯曲破坏

运行在恶劣环境中的海底管道,往往受到内压、轴力和弯矩等复杂荷载的联合作用。腐蚀会导致管壁局部变薄,降低管道极限承载力。为保证管道安全高效运行,准确预测和分析复杂荷载作用下的塑性极限承载力和变形行为就显得尤为重要。考虑大应变和大变形、应力强化和材料非线性,运用数值仿真软件建立腐蚀缺陷管道的三维实体有限元模型,在全尺寸管道破坏试验验证的基础上,对腐蚀管道在内压、轴向压力和弯矩相互作用下的失效模式和极限弯矩承载力进行了相关研究,并进行了腐蚀缺陷几何参数的敏感性分析。研究结果表明:初始内压和初始轴向压力会显著降低腐蚀管道的极限弯矩承载力,并且影响最终的失效模式;在腐蚀缺陷几何尺寸参数中,腐蚀宽度比腐蚀深度和腐蚀长度的影响更大。     

Importance of kelp-derived organic carbon to the scallop <Emphasis Type="Italic">Chlamys farreri</Emphasis> in an integrated multi-trophic aquaculture system

Bivalves and seaweeds are important cleaners that are widely used in integrated multi-trophic aquaculture (IMTA) systems. A beneficial relationship between seaweed and bivalve in the seaweed-based IMTA system has been confirmed, but the trophic importance of seaweed-derived particulate organic materials to the co-cultured bivalve is still unclear. We evaluated the trophic importance of the kelp Saccharina japonica to the co-cultured scallop Chlamys farreri in a typical IMTA farm in Sungo Bay (Weihai, North China). The dynamics of detritus carbon in the water were monitored during the culturing period. The proportion of kelp-derived organic matter in the diet of the co-cultured scallop was assessed via the stable carbon isotope method. Results showed that the detritus carbon in the water ranged from 75.52 to 265.19 μg/L, which was 25.6% to 73.8% of total particulate organic carbon (TPOC) during the study period. The amount of detritus carbon and its proportion in the TPOC changed throughout the culture cycle of the kelp. Stable carbon isotope analysis showed that the cultured scallop obtained 14.1% to 42.8% of its tissue carbon from the kelp, and that the percentages were closely correlated with the proportion of detritus carbon in the water (F =0.993, P= 0.003). Evaluation showed that for 17 000 tons (wet weight) of annual scallop production, the kelp contributed about 139.3 tons of carbon (535.8 tons of dry mass). This confirms that cultured kelp plays a similar trophic role in IMTA systems as it does in a natural kelp bed. It is a major contributor to the detritus pool and supplies a vital food source to filter-feeding scallops in the IMTA system, especially during winter and early spring when phytoplankton are scarce.     

大黄鱼白细胞介素17受体E-like的分子特征及进化分析

白细胞介素17受体(Interleukin 17 receptor,IL-17R)家族与IL-17细胞因子家族介导的各类反应有着密切联系.IL-17RE-like(IL-17REL)是一类最新发现的IL-17受体,其结构与IL-17RE相似,但尚未发现其配体.本研究克隆得到大黄鱼(Larimichthys crocea)IL-17REL(Lyc IL-17REL)的全长c DNA,其开放阅读框全长1 659个核苷酸,推断可编码一个由552个氨基酸组成的蛋白,含有信号肽、胞外段、跨膜区和胞内段.与其他物种的IL-17REL相似,Lyc IL-17REL蛋白的胞外段具有一个保守的FN I-like结构域,而胞内段缺少IL-17受体家族保守的SEFIR(SEF and IL-17R)结构域.多序列比对分析表明Lyc IL-17REL与日本河豚(Takifugu rubripes)IL-17REL的氨基酸序列同源性最高,序列一致性可达57.0%.系统进化分析表明,脊椎动物的IL-17受体家族可分为2类,IL-17RA/RB/RD为一类,IL-17RC/RE/REL为一类.其中鱼类及高等脊椎动物的IL-17REL与IL-17RE亲缘关系最近,并且推测二者可能是由同一基因从硬骨鱼类之前的物种中分化而来.组织分布表明Lyc IL-17REL在所有被检测的组织中为组成型表达,在黏膜相关组织如小肠和鳃中的表达量最高.大黄鱼受嗜水气单胞菌(Aeromonas hydrophila)诱导刺激后,Lyc IL-17REL在其头肾及鳃中的基因转录水平均显著上调.这表明Lyc IL-17REL可能在细菌感染引起的免疫反应中起着重要作用.